User Manual

Transcribed from the original PDF with some corrections.

Powering Bike On

1. • Disengage the kickstand, grab the brake handle to engage the brakes, and seat yourself on the Super73.

   • Press the battery power button to turn the bike on.

   • Once the display screen is illuminated, the throttle or pedal assist is active and you’re ready to ride.

Changing the information viewed on the display

Quick press “O” button to toggle the information viewed on the display.

1. • Speed (mph)

   • Range (miles)

   • Assist (0-4)

   • Total (miles)

Operating Lights

The Super73 RX model comes equipped with a front headlight and rear brake light.

1. • To activate the front headlight, press and hold down the UP “^” arrow button on the display until the light illuminates. Follow the same step to turn off the lights.

   • The rear brake light will automatically be illuminated when the bike is powered on. The rear light will get brighter when the brake levers are engaged.

   • You can also activate the lights via the App

Pedal Assist

To view your pedal assist mode, follow these steps once the display has been turned on and you are seated on the Super73:

• Press on the menu “O” button briefly to switch between display views until “Assist” appears on the screen.

• Press the up “^” button to increase the pedal-assist level. To decrease the assist level, press the down “v” button. Pedal assist ranges from 1-4, with 0 meaning pedal assist is turned off. The higher the level, the more electric assistance you’ll get, and the less you’ll have to pedal.

  • Level 1 (ECO) - 25% Speed Power

  • Level 2 (TOUR) - 50% Speed Power

  • Level 3 (SPORT) - 75% Speed Power

  • Level 4 (SUPER) - 100% Speed Power

• Once you begin pedaling, the pedal assist sensor will activate the motor and you will begin to accelerate to the selected assist level.

• The display will revert to previous viewing mode after desired assist level is chosen.

Settings Menu

Hold down the “O” button on display to activate the settings menu.

Settings parameters:

• Contrast (display window contrast 0-100)

• Units (standard is set to mi/F)

• Position (changes the orientation of display if it is on the left or right side of the bike)

• Backlight (display backlight power 0-100)

• Version is the software version of the system.

• Coin is the battery level inside display.